How to protect CNC engraving machine in the cold wave?
In the current industrial occasions, the probability of CNC engraving machine is relatively high, at the same time, people will see laser cutting machine, and fiber laser cutting machine, no matter what kind of equipment, in the winter also need to pay attention to antifreeze, otherwise it may affect the later operation, so in the cold tide, how can we pay attention to good protection?
CNC engraving machine manufacturers tell you a move: should ensure that the use of CNC engraving machine without power failure, in the process of operation, the normal temperature water temperature should at least be guaranteed at about 5 ~ 10 degrees, so as to ensure that the coolant will not freeze phenomenon, always can maintain the state of circulation.
CNC engraving machine manufacturers tell you: in the selection of antifreeze also need to pay attention to the need to combine with the local temperature, not to say that the lower the freezing point, the better, if the local temperature is relatively low, you should choose slightly lower than the local temperature of antifreeze, in general, it is recommended to use professional brand antifreeze, add the proportion is 30% antifreeze, plus 70% water.
CNC engraving machine in the use of the process there are many ways, into the cold winter, the first need to know, although the appropriate use of antifreeze will have a certain effect, but can not completely replace water, should not be used for a long time within a year. After winter, we should use pure water or deionized water to clean the pipeline. At the same time, during a long period of power failure, we also need to empty all the water in the pipeline, so as to effectively avoid damage to the devices.